# =============================================================================
# play_saolei.tcl —— 没有 VGA 显示器时，在 xsim 命令行里"玩"扫雷
#
# 用法（建议用 source -encoding utf-8 加载本文件，否则 xsim 默认按 GBK 读，中文注释会乱）：
#   cd <某个空目录，例如 _tmp/saolei_sim>
#   xvlog -d SAOLEI_ROM -i <pipelined-cpu/srcs/board> -i <pipelined-cpu/srcs/rtl> \
#         <pipelined-cpu/srcs/rtl/*.v> <pipelined-cpu/srcs/board/cpu21_board_top.v> \
#         <pipelined-cpu/srcs/tb/tb_saolei_play.v>
#   xelab -d SAOLEI_ROM -top tb_saolei_play -snapshot saolei_play
#   xsim saolei_play -tclbatch <本脚本绝对路径>
#
# 然后在 xsim 提示符下敲命令（一个字母就是一步，会立刻重画棋盘）：
#   k c        左键点击（= 板上 BTNC）
#   k u / k d / k l / k r   光标 上/下/左/右（也认 w s a d）
#   k f        插旗模式点击（点一下插旗，再点取消；= 按住 SW3 再点）
#   k p        只切换插旗模式开关（不点击）
#   k z        复位（等于重新上电，回到开始界面）
#   k uucc     可以连写：上、上、点、点
#   shot       不按键，只重画一遍当前画面
#   help       键位说明
#
# 原理：k 把字符写进 cmd.txt；tb_saolei_play 每 100 us 仿真时间轮询一次并执行按键，
#       同时每 1 ms 把显存 dump 到 now.txt；k 再调 fb2png.py --term 把画面画到终端。
#       仿真速度大约是 1 ms 仿真时间 = 0.5 s 墙钟，所以每步等 1~2 秒，比真实慢很多，
#       但足够用来验证"这个程序真的能玩"。
# =============================================================================

set script_dir [file dirname [file normalize [info script]]]
set fb2png     [file normalize [file join $script_dir .. .. saolei tools fb2png.py]]

# 按键字符 -> 人类可读的动作（只用于回显）
array set KEYNAME {
    c "左键点击"   u "上"   w "上"   d "下"   s "下"
    l "左"         a "左"   r "右"
    f "插旗点击"   p "切插旗开关"   g "go 键"   z "复位"
}

# 每次只把一个字符写进 cmd.txt（TB 每 100 us 读走一个，读完就清空）
proc send_char {c} {
    set fh [open "cmd.txt" "w"]
    puts -nonewline $fh $c
    close $fh
}

# 先确保 cmd.txt 存在，否则 TB 每 100 us 都会刷一条 could not be opened 警告
if {![file exists "cmd.txt"]} {
    set fh [open "cmd.txt" "w"]
    close $fh
}

# 把 now.txt 渲染到终端（ANSI 彩色棋盘）
proc render {} {
    global fb2png
    if {![file exists "now.txt"]} {
        puts "  (now.txt not ready yet - run a bit first)"
        return
    }
    if {[catch { exec py $fb2png --term now.txt >@stdout 2>@stderr } err]} {
        puts "  render failed: $err"
        puts "  try manually: py \"$fb2png\" --term now.txt"
    }
}

proc help {} {
    puts "  ---------------- SAOLEI controls (type at the xsim prompt) ----------------"
    puts "   k c         left click (board BTNC)"
    puts "   k u/d/l/r   move cursor up/down/left/right (w/s/a/d work too)"
    puts "   k f         click in flag mode     k p   toggle flag switch only"
    puts "   k z         reset                  k uucc  several actions at once"
    puts "   shot        redraw      help    this text      quit    exit"
    puts "   PNG screenshot: py \"$::fb2png\" now.txt shot.png"
    puts "  ---------------------------------------------------------------------------"
}

# one step: send the key -> advance simulation -> redraw
proc k {keys} {
    set s [string map {" " "c"} [string tolower $keys]]
    foreach ch [split $s ""] {
        if {[string length $ch] == 0} { continue }
        puts "  >> $ch"
        send_char $ch
        run 1500 us
    }
    render
}

proc shot {} { render }

# ---- opening: run a little so the start screen is drawn, then show it ----
help
puts "booting... (init + draw start screen)"
run 3 ms
render